Welcome to Mr Nomad´s On-line catalog. Here you will find the parts and accessories that you will
need to restore and maintain your 55-57 Chevy.
Click on a products name to view it's picture, see more information and to Buy It!
| SKU |
Name |
Description |
Price |
| 11312 |
Distributor Vacuum Line, 6-Cylinder |
This is the distributor vacuum line for all 55-57 models equipped with a 6-cylinder. Priced each. |
$12.00 |
| 10785 |
Overdrive Kickdown Switch Bracket, 2BC |
This is the overdrive kickdown switch bracket that mounts on all models equipped with a 2 barrel carburetor and a 3-speed overdrive transmission. Two piece backet set. Priced per set. |
$38.50 |
| 10762 |
55 Oil Pressure Switch, Original Style |
Original style pancake sender with pin connector for all 55 models. Priced each. |
$80.00 |
| 11229 |
55 V8 Ignition Wire Support Bracket Set |
This set includes all of the original style brackets, grommets and hardware necessary to organize the ignition wires on all 55 models equipped with a V8 engine. Priced per set.. |
$42.00 |
| 11442 |
55-56 2BC Passing Gear Linkage Rod & Swivel |
This is the upper passing gear linkage rod & swivel for all 55-56 models equipped with a V8 and 2BC. Priced each. |
$15.50 |
| 11267A |
55-56 Choke Heat Riser Tube, 6-Cyl. |
This is the choke heat riser tube for all 55-56 models equipped with a 6-cylinder. Priced each. |
$8.00 |
| 11265 |
55-56 Exhaust Manifold Bolt Lock Set |
These locks are designed to keep the exhaust manifold bolts tight on all 55-56 models equipped with a V8. Priced per set. |
$12.50 |
| 11230 |
56 V8 Ignition Wire Support Bracket Set |
This set includes all of the original style brackets, grommets and hardware necessary to organize the ignition wires on all 56 models equipped with a V8 engine. Priced per set.. |
$42.00 |
| 10762B |
56-57 Oil Pressure Switch, Replacement Style |
Replacement style sender with spade connector for all 56-57 models. Can be used on 55 models if terminal connector is changed. Priced each. |
$10.00 |
| 11443 |
57 2BC Passing Gear Linkage Rod & Swivel |
This is the upper passing gear linkage rod & swivel for all 57 models equipped with a V8 and 2BC. Priced each. |
$15.50 |
| 11269 |
57 Choke Heat Riser Tube, 2BC |
This is the choke heat riser tube for all 57 models equipped with a V8 and 2-barrel carburetor. Priced each. |
$8.00 |
| 11270 |
57 Choke Heat Riser Tube, 4BC |
This is the choke heat riser tube for all 57 models equipped with a V8 and 4-barrel carburetor. Priced each. |
$8.00 |
| 11271 |
57 Choke Heat Riser Tube, Dual 4BC |
This is the choke heat riser tube for all 57 models equipped with a V8 and Dual 4-barrel carburetors. Priced each. |
$8.00 |
| 11266 |
57 Exhaust Manifold Bolt Lock Set |
These locks are designed to keep the exhaust manifold bolts tight on all 57 models equipped with a V8. Priced per set. |
$12.50 |
| 11232 |
57 Spark Plug Heat Shields |
These heat shields protect the spark plug wire ends from excessive heat from the exhaust manifolds on all models equipped with a V8 engine. Priced per set. |
$35.00 |
| 11231 |
57 V8 Ignition Wire Support Bracket Set |
This set includes all of the original style brackets, grommets and hardware necessary to organize the ignition wires on all 57 models equipped with a V8 engine. Priced per set.. |
$32.00 |
| 11438 |
Carburetor Bushing Set |
This set includes two carburetor linkage grommets and two carburetor linkage sleeves. Priced per set. |
$6.00 |
| 11436 |
Carburetor Linkage Grommet |
This rubber grommet is used to connect the carburetor linkage to the carburetor. Priced each. |
$1.75 |
| 11437 |
Carburetor Linkage Sleeve |
This plastic accelerator sleeve is used on all models. Two required for all carburetors except 4BC and Fuel Injection which use one. Priced each. |
$2.00 |
| 11309 |
Distributor Vacuum Line, V8 Carter 4BC |
This is the distributor vacuum line for all models equipped with a V8 and Carter 4-barrel carburetor. Priced each. |
$8.00 |
| 10571 |
Front Motor Mount Cushions |
Set of four rubber motor mount cusions for 6 or 8 cylinder engines. Two sets needed per car. Priced per set. |
$13.50 |
| 10069 |
Front Motor Mount Set |
Motor mount set includes rubber cushions, washers, shaft and nuts. Does one side, two sets required per car. Priced per set. |
$37.00 |
| 10070 |
Front V8 Motor Mount Bracket Set |
Motor mount bracket set for all models equipped with a V8. Includes left & right bracket. Priced per set. |
$33.00 |
| 10900A |
Generator Adjustment Arm, 6-Cyl. |
Generator adjustment arm for all models equipped with a 6-cylinder engine. Priced each. |
$23.00 |
| 10900 |
Generator Adjustment Arm, V8 |
Generator adjustment arm for all models equipped with V8 engine. Will not fit 57 models with dual 4BC. Priced each. |
$35.00 |
| 11233 |
Lower Ignition Wire Heat Shields |
These shields are mounted on the engine block behind the exhaust manifolds and protect the egnition wires from heat. Fits all 57 models equipped with a V8 and all 56 models equipped with Dual 4BC. Priced per set. |
$34.50 |
| 10763 |
Oil Filler Breather Cap |
Correct 1955-1957 Chevy design cap with raised OIL markings. Painted black. Priced each. |
$31.00 |
| 11148 |
Oil Pan Drain Plug |
This oil pan drain plug fits all models and comes complete with a gasket. Priced each. |
$1.50 |
| 11473 |
Rubber Engine Mounts for Side mount Conversion |
These are the rubber mounts used with the side motor mount conversion kits. Priced per pair. |
$25.00 |
| 11472 |
Side Motor Mount Conversion Kit, 3/4 |
This conversion kit is used to side mount 1958 and later small and big block engines to the frame. It is designed for placing the engine 3/4 inch forward on a one piece seamless frame. Priced per set. |
$55.00 |
| 11470 |
Side Motor Mount Conversion Kit, 3/4 |
This conversion kit is used to side mount 1958 and later small and big block engines to the frame. It is designed for placing the engine 3/4 inch forward on a two piece frame. Priced per set. |
$55.00 |
| 10819 |
Side Motor Mount Conversion Kit, Stock Location |
This conversion kit is used to side mount 1958 and later small and big block engines to the frame. This kit is designed for placing the engine in the stock location on all cars equipped with a two piece frame. Priced per kit. |
$55.00 |
| 11263 |
Stainless Intake Manifold Washer Set |
Set of 12 intake manifold washers for V8 engine. Priced per set. |
$8.25 |
| 11538 |
Starter Motor Support Bracket |
This bracket supports the back of the starter motor. Priced each. |
$8.50 |
| 10952 |
Valve Cover Stencil Kit |
This kit includes two adhesive backed stencils. Use these stencils to repaint the Chevrolet script on your valve covers. Priced per kit. |
$13.00 |
